fault codes through our forums for example. The CLEAR function is used to clear the detected fault codes, but provides two options. The first is to clear Fault codes from all of the vehicle system ECU's that are selected in the ECUs CONFIG option, and the second allows the possibility to clear fault codes by individual listed ECU's.
You dont need to lay your eyes on the whole circuit. But most important is get a whole vehicle fail code reading and report back what codes are in it. I have never seen a Land Rover with no codes at all in it. So I suspect someone is ignoring a fault that could be the culprit. These kind of jobs can be a nightmare and a lot of guys would avoid it.
ABS 4114 and 4134 (2004 Discovery 2) My 2004 is getting the 3 Amigos very intermittently. It will sometime occur while driving or also while setting in park after a few minutes w/o pushing on the breaks. I pulled the codes and it has a 4114, and 4134. I'm planing to replace the ABS Modulator Shuttle Valve Switch (part # SWO500040), but I want
The steps to actually dealing with the ABS lights are to; 1. Retreive the ABS Fault codes. 2. Actually fix the broken part of the system. 3. Clear the ABS fault codes. If you are lucky you only have to perform step 2 and the lights may go away. Some faults though are logged and require a reset of the ABS faults.
P0462 normally indicates a fuel level anomally. There are many things that could cause that code to appear and a diagnostic is needed (assuming addressing the P1453 issue doesn't solve this one). This is an older thread, you may not receive a response, and could be reviving an old thread.
. 333 29 361 301 305 269 38 223

land rover discovery 3 fault codes